{31 days} globe pendant light

{31 days} header

~created and thrifted~

{diy} globe pendant light 1

It’s much like my tutorial for the mason jar pendant light, but easier!

Supplies:

  • globe
  • pencil
  • exacto knife
  • light kit (i get mine at IKEA)

{diy} globe pendant light 4

{diy} globe pendant light 3

How to:

1. Cut globe in half…most globes are made of cardboard or chip board and are put together as two pieces at the equator. You can cut along the equator with an exacto knife, but there usually a supporting ring of thick chipboard at the equator that you cannot cut through. I actually put pressure on the equator (with my hand, elbow, or knee) like you do with those pop open cans that cinnamon rolls come in. I do it all the way around the equator…careful not to crush the globe…and it usually comes apart on it’s own without any cutting!

{diy} globe pendant light 5

2. Trace around your light socket at the top of the globe and cut a hole with your knife. There is usually a metal ring in between the layers of the chip board at the top and bottom of the globe (where they usually attach to their stands). This is usually the same size as the socket, so if you hit metal, just cut to the outside of the ring and you should be OK.

{diy} globe pendant light 6

3. Insert your light kit into the hole and secure.

{diy} globe pendant light 7

4. Insert light bulb. I always use a low wattage (40 watt) or fluorescent bulb for safety since the globes are made of paper.

You can also embellish you globe on the inside or outside like I did with these…

{diy} globe pendant light 2

You can also see my “how to” in the October 2014 issue of Old House Journal

old house journal

home is…{31 days} a thrifted and created globe pendant light.

Join me while I link up with The Nester every day in October for #write31days.
Click here to find a list of all 31 posts as they are published.

Advertisements

{diy} globe pendant light

Last night I posted this photo on Instagram

{diy} globe pendant light 8

I used to sell these lights at colton+cadence, but have run into a low supply of globes at my local thrift shops, so today I figured I would give a quick tutorial on how to make your own!

{diy} globe pendant light 1

It’s much like my tutorial for the mason jar pendant light, but easier!

Supplies:

  • globe
  • pencil
  • exacto knife
  • light kit (i get mine at IKEA)

{diy} globe pendant light 4

{diy} globe pendant light 3

How to:

1. Cut globe in half…most globes are made of cardboard or chip board and are put together as two pieces at the equator. You can cut along the equator with an exacto knife, but there usually a supporting ring of thick chipboard at the equator that you cannot cut through. I actually put pressure on the equator (with my hand, elbow, or knee) like you do with those pop open cans that cinnamon rolls come in. I do it all the way around the equator…careful not to crush the globe…and it usually comes apart on it’s own without any cutting!

{diy} globe pendant light 5

2. Trace around your light socket at the top of the globe and cut a hole with your knife. There is usually a metal ring in between the layers of the chip board at the top and bottom of the globe (where they usually attach to their stands). This is usually the same size as the socket, so if you hit metal, just cut to the outside of the ring and you should be OK.

{diy} globe pendant light 6

3. Insert your light kit into the hole and secure.

{diy} globe pendant light 7

4. Insert light bulb. I always use a low wattage (40 watt) or fluorescent bulb for safety since the globes are made of paper.

You can also embellish you globe on the inside or outside like I did with these…

{diy} globe pendant light 2

home is…lighting up the world.